|
Resources
Ham-Let ASTAVA offers a broad line of 1,2,3,4,5 instrument manifolds, all are available in a wide range of materials.
[Astava_Catalog.pdf]
Ham-Let Product Lines Brochure
[3902598 EMG.PRODUCT AT A GLANCE 03.pdf]
Wide range of Ham-let products in the world of Solar Energy.
[solar energy.pdf]
Designed for use in control systems, process and instrumentation devices and in industrial equipment.
[Onelok_Tube_Fittings.pdf]
Standard compact design toggle valve for normally closed and quick on/off service.
[H1200_CATALOG.pdf]
Moderate-pressure instrumentation flow-regulating needle valve, generally used for instrumentation panels, sampling systems and accurate applications.
[H1300_Catalog.pdf]
High pressure instrumentation needle valve for shutoff service on instrumentation panels. Compliant with OSHA LOTO Standard 29 CFR Part 1910.147- Control of Hazardous Energy.
[235_240 H300U_2015.pdf]
General purpose fixed cracking pressure check valve (MAWP 3000 psig).
[259_276 H400 062015.pdf]
Designed for general service and instrumentation panels, bi-directional flow regulation and on/off service.
[209_220 H500_Catalog .pdf]
T- type filtration device for protecting system components from fluid particles and contaminates. Easy on-line maintenance without disassembling the system.
[H600_CATALOG.pdf]
Designed for general services with relatively large ports for high flow, tight shutoff, long-life service and low operating torque.
[221_226 H700 2015.pdf]
Designed for general service and instrumentation panel, enabling low and high working pressure and accommodating a wide temperature range with high life cycle.
[H800_CATALOG.pdf]
Designed for low pressure service.
The valve is normally closed. It will open when system pressure reaches the set level and re-close when the system pressure falls below the set level.
[H900_CATALOG.pdf]
Designed for high-pressure service. The valve is normally closed. It will open when system pressure reaches the set level and re-close when the system pressure falls below the set level.
[H900-HP_CATALOG.pdf]
Excellent for Automatic Safety Shutoff in a wide range of systems: Fuel, Toxic Media, Gas, Valued Media, Hydraulic & Pneumatic.
[H911_CATALOG.pdf]
Designed and performed in Stainless Steel for severe environment, high pressure sampling systems, high pressure shut-down systems and test stands.
[H98_Catalog_1.pdf]
Designed and performed in Stainless Steel for severe environment, high pressure sampling systems, high pressure shut-down systems and test stands.
[H99_2015_1.pdf]
Ham-Let 90° and 180° Pneumatic Actuators Range. The most compact actuator for ball valves up to ½” body size applicable for the entire Ham-Let ball valves range.
[HPA_Catalog.pdf]
Fittings for High Purity and Ultra-High Purity applications & vacuum systems in the semiconductor industry.
[HTC_CATALOG.pdf]
Connectors designed for typical pipeline applications in chemical and petrochemical processing plants, oil, gas, and power generation industries.
[Pipeline_Catalog.pdf]
Hose End Connectors for flexible hose.
[Hoseend_Catalog.pdf]
Designed for ultra-vacuum systems.
[UHline_Catalog_1.pdf]
Designed for protecting tubes, tube outlets and instruments exposed to atmospheric pressure.
[VEP_CATALOG.pdf]
Designed for smooth and safe connection between valves using a smart heavy duty
locking mechanism.
[QCLOK_Catalog.pdf]
Designed for extracting samples from a remote process location and safe containment for storage and transportation. Rated to 1800 psi at room temperature for liquids and gases.
[SAMPLE CYLINDER.pdf]
Metallic diaphragm-operated valves in a variety of structures to meet ultra-high purity (UHP) and high-purity (HP) grades.
[UCV_HMJ_Catalog (2).pdf]
1/4", manual or pneumatically operated, designed for low and high-pressure applications in multi-port configurations.
[UCV_HM_SERIES.pdf]
MBV Series Metering Ball Valve Brochure Chinese - shut-off control and fine metering in one compact unit
[MBV.EN.pdf]
MBV Series Metering Ball Valve Brochure Chinese - shut-off control and fine metering in one compact unit
[MBV.JP.pdf]
MBV Series Metering Ball Valve Brochure Chinese - shut-off control and fine metering in one compact unit
[MBV.CH.pdf]
Measuring devices constructed from only high quality materials, guarantees long life with durability industrial, process and instrumentation applications.
[PRESSUE GAUGE line_1.pdf]
Ultra-high purity diaphragm valves for atomic layer deposition and fast switching applications.
[UF_Catalog.pdf]
Hoses catalog Including Stainless Steel hoses for gases and liquids and PTFE hoses as the ideal solution for permanent or temporary connections.
[Hoses cataloge 2018.pdf]
COMPACT WELDED CHECK VALVES
[CMW_Catalog.pdf]
[LETLOK_Tube_fitting_CATALOG_2017.pdf]
[HAM-LET_Rubber_Hoses_Catalog.pdf]
[PLUG_VALVE_Cat_05112017.pdf]
Russian Federation Certificate of Conformance No. C-IL.MG05.V.00024
(Russian & Notarized English Translation)
[Fittings.pdf]
Russian Federation Certificate of Conformance No. C-IL.MG05.V.00025
(Russian & Notarized English Translation)
[Ball valves.pdf]
Canadian Registration Number for Ham-let Fittings per Pressure Vessels Regulation ASME ANSI B1.20.1, B31.1, B31.3
[CRN-2012_1.pdf]
Maritime Certifications: DNV - Det Norske Veritas - Norway: P-11882 Let-Lok fittings Compliance
[TAP00000ZF.PDF]
Let-Lok fittings compliance with TA-Luft.
Product Type Approval Certification No. 922-9566012.
[TUV_Let-Lok.pdf]
Ball Valves test results for H6800,H700, H500, as per ISO 15848-1, including pressure and temperature tests.
[TUV_Valves_1.pdf]
Full compliance with ECE Regulation 110, ECE Regulation 67-01, Draft ECE Compressed Gaseous Hydrogen Regulation, Revision 12b, 10/12/03, and ISO 15500-19.
Certificate No. AF-2007-0209_1
[TUV_CNG_2019.pdf]
Health &Safety Management System. Cert.16406
[ISO18001.en_1.pdf]
Cert.# I10434 , ISO 9001
[iqc_certificate_06_26_2017.pdf]
[ABS 2016 certificate.pdf]
Handling, Assembly, Reassembly, Testing, Installation, Bolt Tightening; Packing Adjustment; and Safety Instructions for the entire range of Ham-Let products.
[Installation_Instruction_1.pdf]
Service instruction for instrumentation process valves.
[Service-Instructions_1.pdf]
[SERVICE_INSTRUCTIONS_3901882 .pdf]
HAM-LET Standard Operational Procedure (S.O.P. # 8184 rev 0) for Cleaning and Packaging Components and Parts
[SOP8184.pdf]
Ham-Let Standard Operational Procedure (S.O.P # 8185 REV02) for Cleaning and Packing Components and Parts, Cleaned for Oxygen Service ("OC") and Lubricant Free ("LF") Applications.
[SOP8185.pdf]
|

About us:
Ham-Let Group was established in 1950.
Traded on the Tel Aviv stock market since 1994.
A worldwide company, Ham-Let Group has 14 branches and 4 subsidiaries around the globe and is constantly growing.
We provide a wide variety of innovative valves, fittings, and hoses for many industries including: Oil & Gas, Semiconductor, Power Generation.
Watch our corporate movie 
Read More ››
|